Window Patching Machine Safety Operating Procedures

Paper box window patcher

The safe operation procedures of the window patching machine are an important guarantee to ensure the personal safety of operators and the normal operation of equipment. The following is a detailed safe operation procedure of the window patching machine:

box window creasing and patching Machine

1. Preparation before operation
   Confirm the power supply status: Before operating the window patching machine, it is necessary to confirm that the power supply has been disconnected and perform necessary insulation treatment to prevent electric shock accidents.
   Check the equipment components: Comprehensively check whether all components of the window patching machine are intact, including guide rails, clamps, motors, control systems, etc., to ensure that there is no damage or looseness.
   Clean up the operation area: Confirm that there are no obstacles in the operation area and the ground is flat so that the equipment can move smoothly. At the same time, it is strictly forbidden to store debris on the table.
   Wear labor protection products: Operators must wear personal protective equipment, such as safety helmets, protective glasses, dust masks, non-slip shoes, etc., to ensure safety during operation.
2. Operation process
   Start the equipment: Before starting the window patching machine, check whether the equipment is in normal condition. After confirmation, turn on the power, start the equipment, and observe whether the equipment is running normally, and whether there are abnormal sounds and burnt smells.
   Adjust parameters: According to the window size and process requirements, adjust the cutting blade position, speed, temperature and other parameters of the window pasting machine. Note that it is strictly forbidden to adjust these parameters during the operation of the equipment to avoid equipment damage or personal injury.
   Place the window: Place the window to be pasted on the window pasting machine steadily, and ensure that the edge of the window is properly aligned with the equipment fixture to prevent the fixture from pinching the window or the operator.
   Start operation: Start the window pasting machine for cutting or film pasting. During the operation, the operator should stand in a safe position, not on the movement trajectory of the equipment, and pay attention to the operation of the cutting blade or film pasting head to prevent knife jamming, knife jumping or poor film pasting.
   Emergency treatment: During the operation of the window pasting machine, if an emergency occurs, such as equipment failure, personal injury, etc., the emergency stop button should be pressed immediately, the power should be cut off, and first aid should be performed on the spot or the emergency number should be called.
3. Post-operation processing
   Turn off the equipment: After completing the window pasting or cutting, turn off the window pasting machine, cut off the power, and clean the equipment to keep the equipment tidy.
   Check the pasting effect: Check the windows after pasting or cutting to ensure that the windows are firmly pasted, without missing pasting, false pasting or poor cutting.
   Equipment maintenance: Regularly check and maintain the window pasting machine, including the inspection and replacement of key components such as power cord, transmission belt, saw blade, guide rail, etc. When abnormal conditions are found, they should be handled in time and reported to the maintenance personnel.
   IV. Safety precautions
   Professional training: Operators must undergo professional training and master the operating skills and safety precautions of the window pasting machine. Untrained personnel are strictly prohibited from operating the window pasting machine.
   It is strictly forbidden to operate after drinking: Operators should maintain a good mental state and are strictly prohibited from operating the window pasting machine after drinking to prevent safety accidents caused by negligence.
   It is forbidden to touch moving parts: During the operation of the window pasting machine, operators are strictly prohibited from touching moving parts such as guide rails and clamps to prevent accidents such as pinching or scratching.
   Non-operating personnel are prohibited from operating: Non-operating personnel are strictly prohibited from entering the operating area or operating the window pasting machine to prevent accidents.
   Regular maintenance: Regularly maintain and maintain the window pasting machine to ensure that the equipment is in good condition. Maintenance includes cleaning equipment, checking components, replacing damaged parts, etc.