Paper box window patcher

Box window creasing and patching Machine

2. Brands and specifications of main parts and accessories:

The main engine motor adopts TECO motor from Taiwan, China;

The inverter adopts imported inverter;

The human-machine interface and PLC are selected from Mitsubishi of Japan

The servo motor is made of TECO, Taiwan, China

The stroke encoder adopts Japanese KOYO (Koyo)

The timing timing wheel and timing belt are made of Japanese nita

The bearings are made of Kunshan original NSK from Japan and SKF from Switzerland

The tooth bar and guide rail adopt the Shangyin brand

The spindle is made of Shanghai hard chrome steel rod

The solenoid valve and cylinder are made of FESTO in Germany and AirTAC in Taiwan

Switches, buttons, and contactors are all made of French Schneider

2. TC-650 chamfering line window sticker safety operation requirements

1. In order to prevent accidents, you must operate according to the following requirements:

(1) Read and comply with the requirements for the use of the equipment, and determine that the operator of the equipment is trained and has normal operation skills.

(2) Check whether the safety protection device of the equipment is working normally before starting.

(3) Do not ignore or destroy the normal operation of the safety guards.

(4) Report the fault to the supervisor immediately and let any personnel who may operate the equipment pay attention.

(5) Make sure that no one is touching the transmission parts of the machine every time you start the machine, and make sure that no tools or screws fall on the machine.

(6) When the machine is running, do not put your hands, feet, or any part of your body into the machine or approach the moving parts of the machine.

(7) Keep the machine and the working area around the machine clean and tidy.

(8) Do not wear loose clothing, pay attention to the cuffs and other places to fasten tight, not loose, so as not to be entangled by the machine.

(9) Ensure the maintenance of the machine, and follow the tips of the manual to maintain the equipment well.

(10) When opening the electrical box and the cover of the live part, make sure that the main power supply has been cut off.

2. Necessary maintenance and cleaning:

Necessary maintenance and cleaning are as important as other safety protocols for the safety of the operator, and floors, workbenches, machines and the inside of the machine must be cleaned and maintained regularly. Grease, oil and other lubricating substances must be cleaned in a timely manner to keep the machine and the surrounding environment clean and hygienic. Do not leave tools or other objects on the floor, inside the machine or inside the machine to prevent injury to equipment and persons.

3. Safety protection device

Fatigue wear and tear of machine parts may cause the failure of safety protection devices, so it is necessary to regularly inspect all safety devices and important moving parts by full-time personnel who are qualified to maintain the equipment in accordance with the instructions provided by the manufacturer.

Video of the window machine

一、Product

Blank length	180-650mm
Blankwidth	150-650mm
Film length	70-300mm
Film width	30-300mm
Paper weight	250-450g/m²
Film thickness	0.1-0.4MM(With heating system)
Mechanical speed	7000pcs/h
Positioning accuracy	±0.5mm
Power voltage	380v/50Hz
Machinepower	5.5/17KW
Machine weight	≈3500KW
Oversll dimendion	7200×1300×1850mm

*All parameters are subjected to our final confirmation before order

Box window Patching Production machine